TIPS ABOUT HOW TO Extend Smok Pen Recharge Time


TIPS ABOUT HOW TO Extend Smok Pen Recharge Time

The Smok Pen is a new pen that was developed by two guys in California. They wished to develop a cool writing instrument that looked like a genuine pen but had the ability to smoke a hookah. They named their product the Smok Valve and the Smok Pen. The Smok Valve has had the marketplace by storm.

smok pen

The Smok Pen has a built quality that’s just great. I came across that even though it is an electronic pen the build quality is simply as good as any of the pens that I have reviewed. This is because of how they made the most notable cap. You don’t need to be worried about the cap cracking or breaking you Smok Valve Pen.

Both biggest differences that separate the Smok Valve from other pens may be the form of the coils and the way that they are built. In general the coil on a Smok Pen is larger than on other pens. I believe that they did this deliberately, to help make the pen feel bigger.

Invest the a look at a Smok Pen, you will notice that the body of the pen is round rather than smooth like other pens. On the back of the pen there is a little tab that houses the coil. Once you press on the tab you can easily turn the heating element on and off. I really liked this feature since it allows me to use the Smok Pen 22 whenever I feel like smoking.

To utilize the Smok Pen you should keep the heat button pressed. After the button is pressed, the heating element will begin to warm up. Once it gets to the appropriate temperature you can switch off the heating element. Smok recommends using a 22mm tank. I prefer a larger tank, but that’s just me.

Once you put your Smok Pen in to the tank you will see a indicator light seriously. The indicator light will stay green if you don’t put your Smok Pen into the Smok Pen charger. Once your Smok Pen has entered the charger the indicator light will turn red. It is very important always put your pen in to the charger before you apply the e-liquids to the coil heads. It is also important to do this before putting your e-liquids in to the coil heads.

After you have completed this step, it is best to check to see for anyone who is at the proper temperature for the coils to fire. If not then you should turn the energy off and try again. Should you be still not satisfied together with your Smok Pen i quickly suggest you take it in for some troubleshooting. This is exactly what I’d call the “troubleshooting process” because sometimes things just do not work as they should. It is suggested that you perform the next two steps, then go on and check the Smok Pen to see if it still gets the electronic charging port.

Prior to going any further you should remove the battery from your own pen and unscrew the magnetic cap. You should then remove the plastic sleeve that holds the sub-ohm. There is a wire that runs through the Smok’s body which is green in color. You should loosen this wire using pliers. After you have loosened this wire you can then access the sub-ohm. You need to then take away the wire from the Smok’s body and carefully insert it in to the Smok pen’s electrical port, being careful to not touch the coils.

Once you have placed the sub-ohm tank into the pen you should then place all of those other components including the wattage, the batteries and the heating element in to the included microwaveable microwave oven. Start the power and follow the on screen instructions. You need to place the pen’s battery in to the microwave and activate the setting. You need to then wait approximately 30 seconds before turning it cool off. When you initially put the pen into the microwave the electronic reading will show a low voltage protection setting. If this setting will not automatically get set you then should follow the on screen instructions.

After the Smok Pen has reached the temperature that it needs to reach you need to then connect the two wires to the positive and negative on the positive post on the Smok unit. You should then connect another end of the battery to the negative post on the negative side of the Smok unit. The ultimate step would be to connect the positive cable Eightvape Coupon to underneath of the Smok’s on / off switch.

After all of the components have been placed into the pen, you should turn the energy on. Following the first test run, you need to be able to start to see the battery life indicator light seriously. If you don’t see any sign of life from the Smok Pen, you should take away the battery from the pen and replace it with a brand new one. For your convenience gleam green light that could be pressed so that you can confirm the battery charging status. Once you have done these things and you do not see the green light indicating charging, you need to replace the battery.

This entry was posted in Uncategorized. Bookmark the permalink.